MySQLTunner is een Perl-tool die u helpt bij het afstemmen van uw MariaDB/MySQL-databaseserver. Het controleert veel parameters van de server, verifieert gebruikerswachtwoorden, controleert op anonieme gebruikers, onveilige wachtwoorden (waarbij bijvoorbeeld het wachtwoord de gebruikersnaam is), controleert op bekende CVE-kwetsbaarheden enz.
De eerste stap bij het uitvoeren van de tool is om het scriptbestand te downloaden van de officiële website https://github.com/major/MySQLTuner-perl
wget https://raw.githubusercontent.com/major/MySQLTuner-perl/master/mysqltuner.plwget https://github.com/major/MySQLTuner-perl/raw/master/vulnerabilities.csvHet basiscommando voor het uitvoeren van het script is:
perl mysqltuner.plOm ook op kwetsbaarheden te controleren, moet u het bestand vulnerabilities.csv downloaden en de opdracht uitvoeren:
perl mysqltuner.pl --cvefile=vulnerabilities.csvEen voorbeeld van de uitvoer van een testserver:
[root@web /]# perl mysqltuner.pl --cvefile=vulnerabilities.csv
>> MySQLTuner 1.8.7 - Major Hayden <[email protected]>
>> Bug reports, feature requests, and downloads at http://mysqltuner.pl/
>> Run with '--help' for additional options and output filtering
[--] Skipped version check for MySQLTuner script
[OK] Currently running supported MySQL version 10.6.5-MariaDB
[OK] Operating on 64-bit architecture
-------- Log file Recommendations ------------------------------------------------------------------
[OK] Log file /var/log/mysqld.log exists
[--] Log file: /var/log/mysqld.log(69K)
[OK] Log file /var/log/mysqld.log is not empty
[OK] Log file /var/log/mysqld.log is smaller than 32 Mb
[OK] Log file /var/log/mysqld.log is readable.
[!!] /var/log/mysqld.log contains 394 warning(s).
[!!] /var/log/mysqld.log contains 49 error(s).
[--] 22 start(s) detected in /var/log/mysqld.log
[--] 1) 2022-01-08 16:04:41 0 [Note] /usr/sbin/mysqld: ready for connections.
[--] 2) 2022-01-04 12:20:12 0 [Note] /usr/sbin/mysqld: ready for connections.
[--] 3) 2021-12-27 17:21:20 0 [Note] /usr/sbin/mysqld: ready for connections.
[--] 4) 2021-12-11 15:39:01 0 [Note] /usr/sbin/mysqld: ready for connections.
[--] 5) 2021-12-11 14:47:28 0 [Note] /usr/sbin/mysqld: ready for connections.
[--] 6) 2021-12-11 14:47:22 0 [Note] /usr/sbin/mysqld: ready for connections.
-------- Storage Engine Statistics -----------------------------------------------------------------
[--] Status: +Aria +CSV +InnoDB +MEMORY +MRG_MyISAM +MyISAM +PERFORMANCE_SCHEMA +SEQUENCE
[--] Data in Aria tables: 32.0K (Tables: 1)
[--] Data in MEMORY tables: 0B (Tables: 40)
[--] Data in MyISAM tables: 1.3G (Tables: 34)
[--] Data in InnoDB tables: 217.2M (Tables: 31)
[OK] Total fragmented tables: 0
-------- Analysis Performance Metrics --------------------------------------------------------------
[--] innodb_stats_on_metadata: OFF
[OK] No stat updates during querying INFORMATION_SCHEMA.
-------- Views Metrics -----------------------------------------------------------------------------
-------- Triggers Metrics --------------------------------------------------------------------------
-------- Routines Metrics --------------------------------------------------------------------------
-------- Security Recommendations ------------------------------------------------------------------
[OK] All database users have passwords assigned
-------- CVE Security Recommendations --------------------------------------------------------------
[OK] NO SECURITY CVE FOUND FOR YOUR VERSION
-------- Performance Metrics -----------------------------------------------------------------------
[--] Up for: 4d 19h 31m 2s (18M q [45.289 qps], 550K conn, TX: 53G, RX: 3G)
[--] Reads / Writes: 90% / 10%
[--] Binary logging is disabled
[--] Physical Memory : 4.0G
[--] Max MySQL memory : 38.3G
[--] Other process memory: 0B
[--] Total buffers: 305.0M global + 259.7M per thread (150 max threads)
[--] P_S Max memory usage: 0B
[--] Galera GCache Max memory usage: 0B
[OK] Slow queries: 0% (33/18M)
[OK] Highest usage of available connections: 76% (114/150)
[OK] Aborted connections: 0.02% (86/550353)
[!!] name resolution is active : a reverse name resolution is made for each new connection and can reduce performance
[OK] Query cache is disabled by default due to mutex contention on multiprocessor machines.
[OK] Sorts requiring temporary tables: 0% (227 temp sorts / 3M sorts)
[!!] Joins performed without indexes: 197183
[!!] Temporary tables created on disk: 56% (990K on disk / 1M total)
[OK] Thread cache hit rate: 99% (645 created / 550K connections)
[OK] Table cache hit rate: 95% (22M hits / 24M requests)
[OK] Open file limit used: 8% (1K/16K)
[OK] Table locks acquired immediately: 99% (17M immediate / 17M locks)
-------- Performance schema ------------------------------------------------------------------------
[--] Performance schema is disabled.
[--] Memory used by P_S: 0B
[--] Sys schema is installed.
-------- ThreadPool Metrics ------------------------------------------------------------------------
[--] ThreadPool stat is enabled.
[--] Thread Pool Size: 2 thread(s).
[--] Using default value is good enough for your version (10.6.5-MariaDB)
-------- MyISAM Metrics ----------------------------------------------------------------------------
[!!] Key buffer used: 61.8% (9.9M used / 16.0M cache)
[OK] Key buffer size / total MyISAM indexes: 16.0M/152.4M
[OK] Read Key buffer hit rate: 100.0% (768M cached / 379K reads)
[!!] Write Key buffer hit rate: 54.4% (3M cached / 1M writes)
-------- InnoDB Metrics ----------------------------------------------------------------------------
[--] InnoDB is enabled.
[OK] InnoDB File per table is activated
[!!] InnoDB buffer pool / data size: 128.0M/217.2M
[!!] Ratio InnoDB log file size / InnoDB Buffer pool size (75 %): 96.0M * 1/128.0M should be equal to 25%
[--] Number of InnoDB Buffer Pool Chunk : 1 for 1 Buffer Pool Instance(s)
[OK] Innodb_buffer_pool_size aligned with Innodb_buffer_pool_chunk_size & Innodb_buffer_pool_instances
[OK] InnoDB Read buffer efficiency: 99.98% (499634018 hits/ 499732161 total)
[!!] InnoDB Write Log efficiency: 270.94% (232636 hits/ 85863 total)
[OK] InnoDB log waits: 0.00% (0 waits / 318499 writes)
-------- Aria Metrics ------------------------------------------------------------------------------
[--] Aria Storage Engine is enabled.
[OK] Aria pagecache size / total Aria indexes: 128.0M/712.0K
[OK] Aria pagecache hit rate: 95.4% (18M cached / 860K reads)
-------- TokuDB Metrics ----------------------------------------------------------------------------
[--] TokuDB is disabled.
-------- XtraDB Metrics ----------------------------------------------------------------------------
[--] XtraDB is disabled.
-------- Galera Metrics ----------------------------------------------------------------------------
[--] Galera is disabled.
-------- Replication Metrics -----------------------------------------------------------------------
[--] Galera Synchronous replication: NO
[--] No replication slave(s) for this server.
[--] Binlog format: MIXED
[--] XA support enabled: ON
[--] Semi synchronous replication Master: OFF
[--] Semi synchronous replication Slave: OFF
[--] This is a standalone server
-------- Recommendations ---------------------------------------------------------------------------
General recommendations:
Check warning line(s) in /var/log/mysqld.log file
Check error line(s) in /var/log/mysqld.log file
Reduce your overall MySQL memory footprint for system stability
Dedicate this server to your database for highest performance.
Configure your accounts with ip or subnets only, then update your configuration with skip-name-resolve=1
We will suggest raising the 'join_buffer_size' until JOINs not using indexes are found.
See https://dev.mysql.com/doc/internals/en/join-buffer-size.html
(specially the conclusions at the bottom of the page).
When making adjustments, make tmp_table_size/max_heap_table_size equal
Reduce your SELECT DISTINCT queries which have no LIMIT clause
Performance schema should be activated for better diagnostics
Before changing innodb_log_file_size and/or innodb_log_files_in_group read this: https://bit.ly/2TcGgtU
Variables to adjust:
*** MySQL's maximum memory usage is dangerously high ***
*** Add RAM before increasing MySQL buffer variables ***
join_buffer_size (> 1.0M, or always use indexes with JOINs)
tmp_table_size (> 16M)
max_heap_table_size (> 16M)
performance_schema = ON enable PFS
key_buffer_size (~ 10M)
Controleer zorgvuldig de Aanbevelingen sectie en onderneem de nodige acties. De MySQL/MariaDB-opties worden opgeslagen in het bestand /etc/my.cnf. Je kunt dit bestand bewerken met een editor zoals vi of nano:
nano /etc/my.cnfSla uiteindelijk het bestand op en start de MySQL-server opnieuw op:
service mysqld restart